| Type: | Wound |
|---|---|
| Material: | Wound |
| Ethylene Oxide Sterilization: | Ethylene Oxide Sterilization |
| Quality Guarantee Period: | Two Years |
| Group: | Adult |
| Logo Printing: | Without Logo Printing |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Wound closure device consists of a pair of polypropylene hasps with two adhesive panels.
The adhesive panels are porous nonwovens coated with a pressure-sensitive hypoallergenic adhesive.
Wound closure device is indicated for the closure of acute wounds such as lacerations and surgical incisions. It may also be used in conjunction with subcutaneous suture operations.
1. For patients with deep wounds, subcutaneous suture operation can be performed according to local clinical practice. See Figure 1.
2. Clean and dry the skin around the wound, making the wound edges as neat as possible. See Figure 2.
3. Take the wound closure device out of the package, peel the hasp off the liner by lifting it from the ribbon ends. See Figure 3 and 4.
4. Position the device so that the two adhesive panels sit on the two sides of the wound. See Figure 5.
5. Press the adhesive panel with your finger gently along the direction of the ribbons so that the adhesive panel adheres firmly on the skin. See Figure 6.
6. Apply the next hasp in the same way so that the gap between the hasps is about 2mm. See Figure 7.
7. Use both hands to hold the ribbons of the hasp and to tighten the hasp gently until the hasps are locked to close the wound. See Figure 8.
8. Cut off all long ends from the ribbons. See Figure 9.
9. Apply a PU film dressing or another secondarydressing to protect the hasp and wound. See Figure 10.
10. The secondary dressing can be removed for observation. A new secondary dressing must be applied after observation.
11. When the wound is healed, remove the hasp by lifting either the side of the adhesive panel and peel from the wound gently. Care must be taken to avoid damaging of the newly healed wound.
We Ningbo Rito Medical Instruments Co., Ltd. is the professional manufacturer and supplier for medical products in China for 15years. We are located in Ningbo which is 2.5hours from Shanghai by high way.
Has own factories of Non-woven series in Hubei provinces. The total area of our factory is 10, 000 square meters, with more than 300 highly skilled workers and 200 sets of production facilities.
Our main products are non-woven uniform and respiratory masks and tubes, such as isolation gown, surgical gown, face mask, apron, boot cover, hood cover, oxygen mask, nebulizer mask, nasal cannula, suction catheter...etc
Also can help our clients to purchase other Medical products like Medical Tubes, Respiratory and Anesthesiology series, Wound Dressing, Urine Bag, Cotton Series, Bandages etc, to save your time and expense.
Our clients covers Southeast Asia, Middle East, Europe, USA and South America. If you want to Join us, pls don't hesitate to contact with us.
Best Greeting to all patients all over the world.
We pray no disaster, no flu, we hope everyone is health and fortunate.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}